SeaShield Sub Sea & Splash Zone Coatings

Denso SeaShield 80 Series

 

Denso SeaShield 100 Series

Denso SeaShield 250HD Series

SeaShield Wooden Pile ProtectionDenso SeaShield 400 Series

Denso SeaShield 2000FD Series

Series 60 – Timber pile protection system

Download AI – Denso SeaShield Series 60 Timber Pile System (pdf) (Back To Top)

For timber piling protection subject to marine organism attack. Components of this system are SeaShield Primer P, SeaShield Seal T Tape or Marine Piling Tape, Denso Ultraflex 1500 Tape and Smartband. Please see below for the Technical Data Sheets.

Series 80 – Steel and concrete pile protection system

AI – Denso SeaShield Series 80 Systems (pdf) (Back To Top)

For Splash Zone Protection of Steel Cylindrical Piling in relatively sheltered environments. Components of this system are SeaShield Primer P, SeaShield Seal T Tape or Marine Piling Tape, Densopol 80 Tape and Smartband. Please see below for the Technical Data Sheets.

Series 70 – Timber pile protection system

AI – Denso SeaShield Series 70 Timber Pile System

The Series 70 system is designed to protect timber piles and surrounding areas from the environment. It consists of SeaShield Primer and Mastic, Marine Piling Tape and Densoglass FX Outerwrap.

Series 100 – Steel, concrete and timber pile protection system

Download AI – Denso SeaShield Series 100 Systems (pdf) (Back To Top)

For splash zone protection of steel cylindrical piles in relatively sheltered environments. Components of this system are SeaShield Primer P, SeaShield Seal T Tape or Marine Piling Tape, Denso Series 100  Jacket and Smartband. Please see below for the Technical Data Sheets.

Series 250 – Timber pile protection system

Download AI – Denso SeaShield Series 250 Timber Pile System (pdf) (Back To Top)

For Splash Zone Protection of Timber Piling on Marinas, Jetties, Mooring Berths and Piers. This system is comprised of a durable heavy duty jacket incorporating foam sealant linings, supporting rods for fastening into position with strapping.

Series 250HD – Steel, concrete and timber pile protection system

AI – Denso SeaShield Series 250HD Systems (pdf)

TDS – Denso SeaShield Series 250HD Systems

(Back To Top)

For splash zone protection of cylindrical piling in harsh environments. Components of this system are SeaShield Primer P, SeaShield Seal T Tape or Marine Piling Tape, and Denso Series 250HD Jacket. Please see below for the Technical Data Sheets.

Series 400 – Timber Pile Protection

Download AI – Denso SeaShield 400.pdf

Down Load Application Instructions for Denso SeaShield System

SeaShield Series 400 System is comprised of the SeaShield Fiber-Form Jacket, C-GRID® 450 and SeaShield 510 UW Grout or Sea-Shield 550 Epoxy Grout. The Series 400 is a revolutionary encapsulation system that not only protects timber piles from aggressive saltwater environments and marine borers, but also strengthens deteriorated piles

with a durable, lightweight and non-corrosive reinforcement.

Series 500 – Steel, concrete and timber pile protection system

Download AI- Denso SeaShield Series 500 (pdf) (Back To Top)

The Series 500 System is tough, durable and provides the ultimate protection to restore steel, concrete and timber piles. Components of this system are the Denso Series 500 Fibreglass Jacket and Denso 550 Epoxy.

Series 2000FD – Ultimate steel and concrete pile protection system

AI – Denso SeaShield Series 2000FD Systems (pdf) (Back To Top)

Splash zone protection of pilings in harsh marine environments. Components of this system are SeaShield Primer P, SeaShield Seal T Tape or Marine Piling Tape, and Denso Series 2000FD Jacket. Please see below for the Technical Data Sheets.

SeaShield 311 UW Curing Epoxy Fluid Grout

Download TDS – SeaShield 311 UW Curing Epoxy Fluid Grout

Denso 311 Epoxy is a 2-component, non-shrink, high strength fluid grout designed for under water or wet conditions. It is a pourable, gap filling compound for underwater repairs such as pile restoration work

SeaShield 510 Underwater Grout

TDS SeaShield 510 Underwater Grout

Denso SeaShield Underwater Grout is designed for underwater use in tidal zones in applications requiring a non shrink, non metallic, washout resistant grout from 12mm up to about 75 mm coating thicknesses. Areas of use: underwater grouting of bridge columns, concrete pilings, concrete tanks, dam repairs, seawalls, piers and other marine structures.

SeaShield 550 Epoxy Grout

TDS – SeaShield 550 Epoxy Grout

Denso SeaShield 550 Epoxy Grout is a water displacing encapsulation and repair grout. It provides a durable well bonded repair to concrete, timber and steel below water. Denso SeaShield 550 Epoxy Grout is typically used for rebuilding piers, jetties and barrier walls. It is designed for underwater applications and is very effective for chemical anchoring of bolts, rail anchors, equipment bases and other structural applications.

SeaShield Splashzone Epoxy Mastic

Download TDS – SeaShield Splashzone Epoxy Mastic

Mouldable epoxy mastic for filling irregular surfaces in steel, concrete, wood and other surfaces in tidal zones or under water.

Technical Data Sheets

Download TDS – Denso SeaShield Primer

Download TDS – Glass Outerwrap 70

Download TDS – Denso SeaShield Mastic

Download TDS – Denso Seal T Tape

Download TDS – Denso Marine Piling Tape

Download TDS – Denso Ultraflex 1500 Tape

Download TDS – Densopol 80 Tape

Download TDS – Densopol 80HT Tape

Download Info – Smart Band (pdf)

Download TDS – Denso SeaShield Series 100 Jackets

Download TDS – Denso SeaShield Series 250HD Jackets

Download TDS – Denso Series 250 for Timber Jacket

Download TDS – Denso SeaShield Series 2000FD Jackets

Download TDS – Denso SeaShield Series Splashzone Epoxy Mastic

Download TDS – Denso SeaShield Series Fiber-Form Jacket

SeaShield Pilemesh CE171